Field Investigation of Mining-Induced Seismicity on Local Geohydrology
Hydraulic response of the rock mass due to earthquakes is one of the concerns in the assessment of the long-term performance of a repository. Studies performed by other researchers indicated...

Hydropulse Tomography for Identifying 3-D Permeability Distribution
For the purpose of identifying subsurface permeability distribution, a geotomographic method named Hydropulse Tomography (HT) was developed. As observation data, HT uses hydraulic pressure...

Solute Transport Characteristics of Fractured Dolomite in Southern Nevada, USA
Recirculating tracer tests in fractured Cambrian dolomite beneath the Amargosa Desert revealed (1) and 83-percent increased in apparent dispersivity resulting from a two-percent increase...

Optimal Rehabilitation Model for Water Distribution Systems
The objective of this paper is to describe a new methodology which can select the pipes to be rehabilitated and/or replaced in an existing water distribution system and determine how much...

Deriving Alternative Structural Modifications Based on Qualitative Interpretation at the Conceptual Design Stage
Current computer tools provide little support in deriving alternative modifications based on qualitative structural interpretation of a conceptual design. This paper presents a behavior-based...

Foundation Uniform Pressure and Soil Structure Interaction
The enclosed paper was presented in the ASCE, 8th Conference on Computing in Civil Engineering and published in its proceedings. One of its main assumptions was considering the foundation...

Maglev Guideway Route Alignment Parameters
Passenger comfort at high maglev vehicle speeds (110 to 134 meters per second) has significant impact on the proposed use of the existing highway and railroad rights-of-way for hosting...

Climate Change: Is Trouble Ahead for Water Engineers?
Very long range forecasts of future global warming from 2 to 5?C have been made as a result of the increase in carbon dioxide and trace gases in the atmosphere due to man's activities....

IRRICAD ? Computerized Irrigation Design
IRRICAD is a software program that helps irrigation designers by using a computerized systems approach to design. The program features drawing CAD input, interpolation of elevation data,...

CPIVOT v 2.0 Center Pivot Analysis and Design Software
A micro-computer based software package is presented which can be used for hydraulic design and/or analysis of center pivot irrigation systems. The software is written in C and requires...

Siting Agricultural Weather Stations
Studies were conducted in Arizona and Washington to investigate how the surrounding fetch affects data collected by agricultural weather stations (AWS). AWS surrounded by extensive areas...

Steel Penstocks
Steel Penstocks, ASCE Manuals and Reports on Engineering Practice No. 79 covers the design, manufacture, installation, testing, startup, and...

Mechanism of Air Entrainment in Spillway Aerators
The mechanism of air entrainment in the Nappe over spillway aerators was investigated. Turbulence was identified as the main agent for aeration. It was found that Nappe underpressure influences...

Hydraulic Analysis of the McCook Outlet Manifold
A 1:40-scale model of the proposed McCook Outlet Manifold was tested at the U.S. Army Engineer Waterways Experiment Station (WES). Subsequently, flow conditions in the manifold were calculated...

A Model for Low-Drag Landslides
Field observations and experimental records indicate that the primary mode of motion of many large landslides is that of sliding rather than flowing. Most of the shear during sliding is...

Hurricane Andrew in South Florida: Preparing a Water Management System for Disaster
This paper analyzes Hurricane Andrew from its beginning as a tropical storm to the powerful force that it later became. The careful monitoring that took place throughout its transformation...

Computational Hydraulics?The Systems Approach
This paper introduces two modern computational hydraulic computer programs that combine the calculated subcritical and supercritical water surface profiles and pressure gradients in open...

Top Width of Pier Scour Holes in Free and Pressure Flow
The maximum top width of the local scour holes at piers is shown to be a simple function of the scour depth and the angle of repose of the bed material in water. Knowledge of the top width...

Preliminary Studies of Pressure Flow Scour
Bridges that become inundated during floods have slightly pressurized flow that impacts bridge piers and creates an aggravated scour condition. Results of two preliminary laboratory studies...

Pressure Relief Under Hydraulic Jump Stilling Basins
Gravity drainage cannot be used for any portion of a structure located below tailwater level. Yet, drainage of this area may be required to relieve sub-floor pressures and reduce the risk...

 

 

 

 

Return to search